Symphony Industrial AI uses the Fluke Motor Current Clamp for use with TRIO brand products.
This item requires and M-12 to BNC adapter cable such as item T12-8201-0460 (4 BNC) or T2-8201-0640 (single BNC) to connect to TRIO.
Specifications
- Nominal current range 400A
- Continuous current range 1 A - 400 A
- Maximum Non-Destructive Current 1000 A
- Lowest measurable current 1 A
- Basic accuracy 2% + 0.06 A (45-400 Hz) (% reading + floorspec)
- Useable frequency 5 Hz - 20 kHz
- Output level(s) 1 mA/A
Safety
- Safety CAT IV 600 V, CAT III, 1000 V
- Maximum voltage 1000 V AC rms from earth to ground, in compliance with EN61010
Mechanical & General Specifications
- Maximum conductor diameter 32 mm (1.25 inches)
- Maximum conductor size (busbar) 750 MCM
- Output cable length 1.5 m (59 inches)
- Shrouded banana plugs Yes
Comments